You are here: Home > CASES > 2 Sets Complete 10 T/H Feed Production Lines in Saudi Arabia

2 Sets Complete 10 T/H Feed Production Lines in Saudi Arabia

Time:2023-06-13

In 2020, a Saudi Arabian customer purchased two 10 tons/hour of fully automatic feed production lines for the production of goat feed and dairy cow feed. The Saudi Arabian customer needed to purchase animal feed production lines and consulted 6-8 world-renowned feed pellet machine manufacturers. Because the customer is for commercial purposes, the quality requirements for the feed pellet machine are relatively high. After comparing the products of 8 feed pellet machine manufacturers, they finally chose our Herm Machinery. At present, the equipment has been shipped to Saudi Arabia and will be put into production soon.

Saudi_Arabia_animal_feed_mill_plant (13)
Saudi_Arabia_animal_feed_mill_plant (1)
Make a Quick Inquiry Now !

Raw material:

Raw materials for sheep, goat, and cow feed include grains such as corn, wheat, barley, and soybean meal (similar to poultry feed), and crude fibers such as green grass, hay, and straw.

Introduction of process:

The features of ruminant feed are coarse grinding fineness(screen hole diameter 4-8mm), low curing and conditioning requirements(pellet mill adopts single layers conditioner), finished products with big pellet diameter(pellet diameter is around 4-10mm). Double sets SZLH420 ruminant feed process is with 20-30tph capacity, it adopts two grinding lines, one batching & mixing line, two pelleting lines, and two packing lines. The total equipment power is around 700kw. The construction area of the production area is about 21*17.5*28m and equipped with a 2T boiler. The whole line is compact in design, reasonable in structure, meets the requirement of environmental protection, and can be customized and designed according to the requirements of customers.

chicken_feed_mill_cost

How To Make Sheep Feed?

1. Raw material receiving and cleaning section: the raw materials that do not need to be crushed are input from the auxiliary feed port, and the debris and bulk materials are removed through the fence, and then transported through the conveyor and elevator to the primary cleaning screen to remove the ropes and larger pieces. The raw materials enter the magnetic separator to remove the metal debris, and then enter the batching warehouse, waiting for the batching, and the dust generated by the feeding enters the bag dust removal system for negative pressure dust removal. The raw materials that need to be crushed pass through the fence to remove the debris and are sent to the primary cleaning screen by the hoist to remove the ropes, labels, and other debris, and then the iron impurities are removed by the permanent magnet cylinder and then enter the warehouse to be crushed.

Saudi_Arabia_animal_feed_mill_plant (2)

2. Crushing section: the raw materials after magnetic separation enter the crusher, and the screens are selected according to the requirements of different product crushing fineness. The material first enters the feeding auger, and the feeding speed of the feeding auger is controlled by the inverter. The material passes through the feeding auger and enters the crusher for high-speed crushing. This process will generate a lot of heat and dust. This process uses a pulse dust removal system and adopts the negative pressure generated by a high-speed fan to make the crushed materials quickly pass through the screen of the crusher, which solves the heat and dust problems generated by crushing. The crushed materials pass through conveyors and elevators to the warehouse for ingredients.

Saudi_Arabia_animal_feed_mill_plant (3)

3. Batching and mixing section: The crushed materials and the raw materials that do not need to be crushed are sent to the batching process together. The batching adopts the automatic control system to carry out precision batching according to two proportions, and the liquid-adding system adds soybean oil to the batching. The prepared material enters the granulating section through the conveyor and elevator.

Saudi_Arabia_animal_feed_mill_plant (5)

4. Granulation section: The materials from the mixing section are heated to 85°C by high-temperature steam for gelatinization, and then enter the granulator for granulation. The prepared teaching trough material particles enter the countercurrent cooling tower for exhaust air cooling, and the cooled particles enter the conveyor and elevator to the finished product warehouse.

Saudi_Arabia_animal_feed_mill_plant (11)

5. Finished product packing section: an electronic packing scale is installed under the finished product warehouse, and the packing scale will automatically quantify the packaging according to the adjusted and set amount, and then the bag mouth will be sewn by the sewing machine and automatically transported to the stacker to complete the processing process.

Saudi_Arabia_animal_feed_mill_plant (10)
Saudi_Arabia_animal_feed_mill_plant (8)

Henan Herm Machinery Co., Ltd was established in 2010 and has been devoted to the research and development of Feed Mill Machinery ever since. With more than 10-year experience, Herm® has become a leading manufacturer and supplier of animal feed machines and complete animal feed production linescattle feed plantspoultry feed plants, animal feed pellet production lines, etc. It always endeavored to improve the quality of products and aims to meet the new requirements of the international market. 


If You Are Ready to Start a Feed Pellet Plant Business, please contact us for the feed mill machine. We Can Provide Professional Design and Comprehensive Guidance According to Your Needs. Get in touch with us now!

Welcome Contact Us!

Henan Herm Machinery Co., Ltd

Email: info@hermmachinery.com

Whatsapp: 0086 18037508651

Previous Article:

HOT SALE PRODUCTS

Tell Us What Are You Looking For

    logo

    Henan Herm Machinery Co., Ltd.

    Feed Production Line Solutions Supplier

    Zhoukou City, Henan Province, China.

    Wechat

    Copyright © 2015-2023 by Henan Herm Machinery Co., Ltd. All rights reserved.